A blog on VoIP Phones, VoIP Phone Systems & VoIP Phone Equipment.

How to change the ringtone on Syspine IP Phone 310

You can change the ring tone on Syspine IP Phone 310 through the web interface or the phone itself. The procedure is given below: Web Interface: Check the phone IP by pressing  #*47  (#*IP#) Open a web browser and type in the IP address Use the phone login as ‘admin’ and password as ‘0000’ Under YV5 click on Phone Settings YV5->Phone Settings. Here you can change the default ringer volume and ringer...

Syspine Phones Shortcut Codes / Star Codes / Settings / Shortcut Keys or Command Codes

Syspine Phones Shortcut Codes / Star Codes / Settings / Shortcut Keys or Command Codes Following has been recompiled from different sources including the response point mailing list. # Enter key, used for immediate dialling 886# Dial Voicemail 822# Dial Auto Attendant locally (IVR); Good for checking welcome greetings 872# Dial the Analog Paging System of Syspine / Intercom #*47* Displays IP Address of...

Changing LCD Panel and Ventilation Plate orientation on Syspine

The LCD Panel and the ventilation plate on Syspine unit are removable and adjustable. It is helpful when placing the unit on a wall or in another direction. The LCD Panel on Syspine base unit can be detached by pressing the button on the right hand side. Once taken out, you can flip it and put it back in the same slot. You should be able to hear two clicks when it is properly adjusted. For the ventilation plate on...

How to reset the password of Syspine?

You can reset the password of Syspine base unit if you have physical access to the system. You need to look into the “Utilities” folder in the installation CD Rom that came with your Syspine System. You will see a password reset utility there. Please copy it to a USB Drive and plug it into the Syspine Base Unit. Instructions are included in the same folder. It is recommended that the USB drive has a indicator...

How many SIP trunks Response Point system can support?

Response Point supports only 1 SIP Trunk configuration into the system. That means you can configure only one ITSP/SIP Trunk or a Voice Over IP phone line. However, depending on the provider, this trunk can provide you with multiple inbound phone numbers and several outbound calling channels for multiple outbound lines. For further details and service provider recommendations, please contact sales@cigear.com. CIGear...

« Previous Entries

Powered by WordPress | Designed by Elegant Themes