Cisco UC320W Small Business Phone System with 4 FXO

System Overview

The Cisco UC320W Configuration Utility helps you to configure your Unified Communications System 

quickly and easily. 

The dynamic user interface has two modes to help you to install, configure, and manage your Unified 

Communications System. 

• Initial setup: When you create a new configuration, the user interface makes it easy to connect 

to services, install the equipment, and configure the features for your site. First you use the 

Getting Started menu to complete the essential installation tasks. Then, in the Configuration 

module, the interface guides you step by step through the configuration process. As you work, 

you also can access the Status menu to view information.

• Ongoing management: When you work from an applied configuration, the user interface makes 

it easy to monitor and maintain the Unified Communications System. The Quick View page 

provides an overview of the status. Use the links in the Quick View page and in the navigation 

tree to view detailed information about the network, the devices, and the telephony system. You 

also can view call detail records and system logs. You also can access the Configuration menu 

to review or modify the settings. 

System Requirements

• Computer with a web browser. Cisco recommends Internet Explorer version 7 or 8, Firefox 

version 3.6, Safari version 4 or 5, and Google Chrome 10. For best results, set the screen 

resolution to 1024x768 or higher. Be aware that extra browser toolbars will reduce the usable 

screen area. At 1024x768, display four or fewer toolbars.

• Adobe Flash Player version 10.1 or later.

• Cisco SPA300 Series or Cisco SPA500 Series IP phones. You can have up to 25 users. Note:

Only 24 phones, including all enabled Cisco SPA8800 FXS ports, may be licensed to the Cisco 

UC320W. The built-in FXS port on the Cisco UC320W does not count towards this license limit.

• Power adapters for the phones, as needed. Cisco SPA300 Series phones always require power 

adapters. Cisco SPA500 Series phones can receive power from a Power over Ethernet switch.

• Ethernet cables to connect IP phones and computers.

• For wireless operation, securely connect the antennas to the base unit. Signal loss can result if 

an antenna is not seated properly.

• Internet service. A WAN connection is required for operation of the Cisco UC320W. Time settings 

are provided by an NTP server.

• Voice over IP service or analog phone service.