Comments for CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX http://www.cigear.com/support Information on VoIP, Unified Communication and Network Solutions Wed, 10 Mar 2010 09:29:29 +0000 http://wordpress.org/?v=2.6 Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 6 - Final Thoughts and Summary Review by Never http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-6-final-thoughts-and-summary-review/#comment-50 Never Thu, 25 Jun 2009 09:12:02 +0000 http://www.cigear.com/support/?p=370#comment-50 Yes, AG-188N supports both SIP and IAX2 is good for VoIP. Actually there is another advantage of AG-188N is it is with BYPASS which it could make IP call and PSTN call with one normal phone only. Yes, AG-188N supports both SIP and IAX2 is good for VoIP. Actually there is another advantage of AG-188N is it is with BYPASS which it could make IP call and PSTN call with one normal phone only.

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 3 - Setting the time and configuring outbound dialing by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 7 – Addendum http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-part-3-setting-the-time-and-configuring-outbound-dialing/#comment-49 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 7 – Addendum Sat, 06 Jun 2009 02:25:14 +0000 http://www.cigear.com/support/?p=362#comment-49 [...] 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part [...] [...] 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 2 – Initial setup using IAX by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 7 – Addendum http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-2-%e2%80%93-initial-setup-using-iax/#comment-48 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 7 – Addendum Sat, 06 Jun 2009 02:20:40 +0000 http://www.cigear.com/support/?p=360#comment-48 [...] 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and [...] [...] 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 6 - Final Thoughts and Summary Review by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 1 - The unboxing http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-6-final-thoughts-and-summary-review/#comment-47 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 1 - The unboxing Sat, 06 Jun 2009 02:19:29 +0000 http://www.cigear.com/support/?p=370#comment-47 [...] Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review Part 7 – [...] [...] Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review Part 7 – [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 1 - The unboxing by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 5 - Networking and Internal Router http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-part-1-the-unboxing/#comment-46 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 5 - Networking and Internal Router Sat, 06 Jun 2009 02:19:09 +0000 http://www.cigear.com/support/?p=357#comment-46 [...] Part 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review Part 7 – Addendum [...] [...] Part 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review Part 7 – Addendum [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 5 - Networking and Internal Router by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 2 – Initial setup using IAX http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-5-networking-and-internal-router/#comment-45 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 2 – Initial setup using IAX Sat, 06 Jun 2009 02:18:34 +0000 http://www.cigear.com/support/?p=367#comment-45 [...] the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review Part 7 – [...] [...] the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review Part 7 – [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 1 - The unboxing by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 3 - Setting the time and configuring outbound dialing http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-part-1-the-unboxing/#comment-44 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 3 - Setting the time and configuring outbound dialing Sat, 06 Jun 2009 02:17:42 +0000 http://www.cigear.com/support/?p=357#comment-44 [...] Part 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review Part 7 – Addendum [...] [...] Part 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review Part 7 – Addendum [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 1 - The unboxing by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 4 – Setting up SIP, and securing the adapter http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-part-1-the-unboxing/#comment-43 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 4 – Setting up SIP, and securing the adapter Sat, 06 Jun 2009 02:16:51 +0000 http://www.cigear.com/support/?p=357#comment-43 [...] Part 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review Part 7 – Addendum [...] [...] Part 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review Part 7 – Addendum [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 1 - The unboxing by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 6 - Final Thoughts and Summary Review http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-part-1-the-unboxing/#comment-42 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 6 - Final Thoughts and Summary Review Sat, 06 Jun 2009 02:15:53 +0000 http://www.cigear.com/support/?p=357#comment-42 [...] Part 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review Part 7 – Addendum [...] [...] Part 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review Part 7 – Addendum [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 2 – Initial setup using IAX by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 5 - Networking and Internal Router http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-2-%e2%80%93-initial-setup-using-iax/#comment-41 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 5 - Networking and Internal Router Sat, 06 Jun 2009 02:14:57 +0000 http://www.cigear.com/support/?p=360#comment-41 [...] Part 2 of this series, I showed you the WAN configuration page. Let’s take one more look at it: Atcom AG-188N WAN [...] [...] Part 2 of this series, I showed you the WAN configuration page. Let’s take one more look at it: Atcom AG-188N WAN [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 7 – Addendum by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 6 - Final Thoughts and Summary Review http://www.cigear.com/support/2009/06/05/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-7-%e2%80%93-addendum/#comment-40 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 6 - Final Thoughts and Summary Review Sat, 06 Jun 2009 02:13:46 +0000 http://www.cigear.com/support/?p=379#comment-40 [...] Previous Installment | Next Installment [...] [...] Previous Installment | Next Installment [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 1 - The unboxing by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 7 – Addendum http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-part-1-the-unboxing/#comment-39 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 7 – Addendum Sat, 06 Jun 2009 02:12:18 +0000 http://www.cigear.com/support/?p=357#comment-39 [...] Part 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review Part 7 – Addendum [...] [...] Part 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review Part 7 – Addendum [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 6 - Final Thoughts and Summary Review by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 7 – Addendum http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-6-final-thoughts-and-summary-review/#comment-38 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 7 – Addendum Sat, 06 Jun 2009 02:11:32 +0000 http://www.cigear.com/support/?p=370#comment-38 [...] Previous Installment [...] [...] Previous Installment [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 6 - Final Thoughts and Summary Review by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 5 - Networking and Internal Router http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-6-final-thoughts-and-summary-review/#comment-34 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 5 - Networking and Internal Router Wed, 03 Jun 2009 17:31:40 +0000 http://www.cigear.com/support/?p=370#comment-34 [...] Previous Installment | Next Installment [...] [...] Previous Installment | Next Installment [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 3 - Setting the time and configuring outbound dialing by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 6 - Final Thoughts and Summary Review http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-part-3-setting-the-time-and-configuring-outbound-dialing/#comment-33 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 6 - Final Thoughts and Summary Review Wed, 03 Jun 2009 17:31:01 +0000 http://www.cigear.com/support/?p=362#comment-33 [...] 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part [...] [...] 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 5 - Networking and Internal Router by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 6 - Final Thoughts and Summary Review http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-5-networking-and-internal-router/#comment-32 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 6 - Final Thoughts and Summary Review Wed, 03 Jun 2009 17:30:46 +0000 http://www.cigear.com/support/?p=367#comment-32 [...] yesterday’s installment of this series we discussed the internal router and other networing capabilities of the Atcom AG-188N (sold in [...] [...] yesterday’s installment of this series we discussed the internal router and other networing capabilities of the Atcom AG-188N (sold in [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 5 - Networking and Internal Router by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 4 – Setting up SIP, and securing the adapter http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-5-networking-and-internal-router/#comment-31 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 4 – Setting up SIP, and securing the adapter Wed, 03 Jun 2009 17:28:09 +0000 http://www.cigear.com/support/?p=367#comment-31 [...] Previous Installment | Next Installment [...] [...] Previous Installment | Next Installment [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 4 – Setting up SIP, and securing the adapter by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 5 - Networking and Internal Router http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-4-%e2%80%93-setting-up-sip-and-securing-the-adapter/#comment-30 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 5 - Networking and Internal Router Wed, 03 Jun 2009 17:26:56 +0000 http://www.cigear.com/support/?p=364#comment-30 [...] our previous installment we completed setting up the VoIP portion of the Atcom AG-188N (sold in North America by CIGear), [...] [...] our previous installment we completed setting up the VoIP portion of the Atcom AG-188N (sold in North America by CIGear), [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 6 - Final Thoughts and Summary Review by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 4 – Setting up SIP, and securing the adapter http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-6-final-thoughts-and-summary-review/#comment-29 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 4 – Setting up SIP, and securing the adapter Wed, 03 Jun 2009 17:23:50 +0000 http://www.cigear.com/support/?p=370#comment-29 [...] Part 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review [...] [...] Part 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 3 - Setting the time and configuring outbound dialing by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 4 – Setting up SIP, and securing the adapter http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-part-3-setting-the-time-and-configuring-outbound-dialing/#comment-28 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 4 – Setting up SIP, and securing the adapter Wed, 03 Jun 2009 17:23:35 +0000 http://www.cigear.com/support/?p=362#comment-28 [...] yesterday’s installment we had pretty much configured the VoIP side of the Atcom AG-188N (sold in North America by CIGear) [...] [...] yesterday’s installment we had pretty much configured the VoIP side of the Atcom AG-188N (sold in North America by CIGear) [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 6 - Final Thoughts and Summary Review by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 3 - Setting the time and configuring outbound dialing http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-6-final-thoughts-and-summary-review/#comment-27 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 3 - Setting the time and configuring outbound dialing Wed, 03 Jun 2009 17:22:09 +0000 http://www.cigear.com/support/?p=370#comment-27 [...] Part 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review [...] [...] Part 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 5 - Networking and Internal Router by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 3 - Setting the time and configuring outbound dialing http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-5-networking-and-internal-router/#comment-26 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 3 - Setting the time and configuring outbound dialing Wed, 03 Jun 2009 17:21:35 +0000 http://www.cigear.com/support/?p=367#comment-26 [...] the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary [...] [...] the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 4 – Setting up SIP, and securing the adapter by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 3 - Setting the time and configuring outbound dialing http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-4-%e2%80%93-setting-up-sip-and-securing-the-adapter/#comment-25 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 3 - Setting the time and configuring outbound dialing Wed, 03 Jun 2009 17:21:09 +0000 http://www.cigear.com/support/?p=364#comment-25 [...] Previous Installment | Next Installment [...] [...] Previous Installment | Next Installment [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 2 – Initial setup using IAX by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 3 - Setting the time and configuring outbound dialing http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-2-%e2%80%93-initial-setup-using-iax/#comment-24 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 3 - Setting the time and configuring outbound dialing Wed, 03 Jun 2009 17:20:50 +0000 http://www.cigear.com/support/?p=360#comment-24 [...] yesterday’s installment of this review of the Atcom AG-188N (sold in North America by CIGear), I had mentioned that you [...] [...] yesterday’s installment of this review of the Atcom AG-188N (sold in North America by CIGear), I had mentioned that you [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 6 - Final Thoughts and Summary Review by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 2 – Initial setup using IAX http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-6-final-thoughts-and-summary-review/#comment-23 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 2 – Initial setup using IAX Wed, 03 Jun 2009 17:19:44 +0000 http://www.cigear.com/support/?p=370#comment-23 [...] Part 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review [...] [...] Part 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary Review [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 4 – Setting up SIP, and securing the adapter by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 2 – Initial setup using IAX http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-4-%e2%80%93-setting-up-sip-and-securing-the-adapter/#comment-22 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 2 – Initial setup using IAX Wed, 03 Jun 2009 17:19:24 +0000 http://www.cigear.com/support/?p=364#comment-22 [...] Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary [...] [...] Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 3 - Setting the time and configuring outbound dialing by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 2 – Initial setup using IAX http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-part-3-setting-the-time-and-configuring-outbound-dialing/#comment-21 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 2 – Initial setup using IAX Wed, 03 Jun 2009 17:18:54 +0000 http://www.cigear.com/support/?p=362#comment-21 [...] Previous Installment | Next Installment [...] [...] Previous Installment | Next Installment [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 1 - The unboxing by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 2 – Initial setup using IAX http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-part-1-the-unboxing/#comment-20 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 2 – Initial setup using IAX Wed, 03 Jun 2009 17:17:53 +0000 http://www.cigear.com/support/?p=357#comment-20 [...] yesterday’s installment I explained why, in some cases, IAX is the superior protocol to use for VoIP calls. Of course, [...] [...] yesterday’s installment I explained why, in some cases, IAX is the superior protocol to use for VoIP calls. Of course, [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 5 - Networking and Internal Router by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 1 - The unboxing http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-5-networking-and-internal-router/#comment-19 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 1 - The unboxing Wed, 03 Jun 2009 17:15:29 +0000 http://www.cigear.com/support/?p=367#comment-19 [...] the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary [...] [...] the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 4 – Setting up SIP, and securing the adapter by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 1 - The unboxing http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-4-%e2%80%93-setting-up-sip-and-securing-the-adapter/#comment-18 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 1 - The unboxing Wed, 03 Jun 2009 17:15:11 +0000 http://www.cigear.com/support/?p=364#comment-18 [...] Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary [...] [...] Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part 6 – Final Thoughts and Summary [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 3 - Setting the time and configuring outbound dialing by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 1 - The unboxing http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-part-3-setting-the-time-and-configuring-outbound-dialing/#comment-17 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 1 - The unboxing Wed, 03 Jun 2009 17:14:53 +0000 http://www.cigear.com/support/?p=362#comment-17 [...] 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part [...] [...] 1 – The unboxing Part 2 – Initial setup using IAX Part 3 – Setting the time and configuring outbound dialing Part 4 – Setting up SIP, and securing the adapter Part 5 – Networking and Internal Router Part [...]

]]> Comment on Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) – Part 2 – Initial setup using IAX by CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 1 - The unboxing http://www.cigear.com/support/2009/06/03/review-of-atcom-ag-188n-iaxsip-ata-voip-adapter-%e2%80%93-part-2-%e2%80%93-initial-setup-using-iax/#comment-16 CI Gear Tech Blog: VoIP, UC, Response Point, Asterisk, 3CX » Review of Atcom AG-188N IAX+SIP ATA (VoIP adapter) - Part 1 - The unboxing Wed, 03 Jun 2009 17:14:30 +0000 http://www.cigear.com/support/?p=360#comment-16 [...] Next installment [...] [...] Next installment [...]

]]> Comment on Support by abaplab http://www.cigear.com/support/support/#comment-15 abaplab Sun, 26 Apr 2009 15:45:48 +0000 http://www.cigear.com/support/?page_id=150#comment-15 <ul><strong>Problem with Realtek LAN Card and the Solution</strong></ul> I had the same problem with a ELX-3000. The appliance use a ATOM and a RealTek Lan IC. I simply did what was posted another site..... **************** Atom and r8101E driver To get the Atom box to work this is what I did. Grab a USB key drive. Go into the BIOS and disable the card and reboot. Once running download the driver from and copy to USB key drive. downloadcenter.intel.com/Detail_Desc.asp...ductID=2916&D... Compile the driver by following the directions in the file downloaded. Remove the r8169 driver completely, this is the reason that this and all other r8169 based systems will not boot the iso. reboot into the bios and enable the card. I pointed this issue out months ago to everyone when I still worked on this project. This is one of the main reasons that I would not update the kernel since this module was completely borken in a lot of distros. Here is a link from Intel that shows which distros have issues with this driver. Try booting a standard CentOS 5.2 disk on a r8169/r8101/etc.. based system and see what happens. It will kernel panic, just like the new 2.6.2 iso will. www.intel.com/support/motherboards/desktop/d945gclf/sb/CS-... ************** It worked for me...I hope it does for you... Guy Problem with Realtek LAN Card and the Solution

I had the same problem with a ELX-3000. The appliance use a ATOM and a RealTek Lan IC.

I simply did what was posted another site…..

****************

Atom and r8101E driver

To get the Atom box to work this is what I did.
Grab a USB key drive.

Go into the BIOS and disable the card and reboot.

Once running download the driver from and copy to USB key drive.

downloadcenter.intel.com/Detail_Desc.asp…ductID=2916&D…

Compile the driver by following the directions in the file downloaded.

Remove the r8169 driver completely, this is the reason that this and all other r8169 based systems will not boot the iso.

reboot into the bios and enable the card.

I pointed this issue out months ago to everyone when I still worked on this project. This is one of the main reasons that I would not update the kernel since this module was completely borken in a lot of distros. Here is a link from Intel that shows which distros have issues with this driver. Try booting a standard CentOS 5.2 disk on a r8169/r8101/etc.. based system and see what happens. It will kernel panic, just like the new 2.6.2 iso will.

http://www.intel.com/support/motherboards/desktop/d945gclf/sb/CS-...

**************

It worked for me…I hope it does for you…

Guy

]]>